EPina manufacturer and exporter of gear speed reducers
   Home >> Show The Other Products

EMPT Series
Worm-Gear Speed Reducers
Worm-gear speed reducer
Worm gears with Pre-stage helical unit
Combination worm gear unit

Combination of speed variator and Worm-gear speed reducer
Torque arm
Output shaft and cover
Input flange B5 and unput flange B14

Shaft input worm-gear speed reducer and combination worm gear unit
G3 Series
Helical Gear Reducers

Three-phase motor reducer with foot screw
Three-phase motor reducer with flange
Input-flange reducer with foot screw

Input-flange reducer with output flange
Double-shaft reducer with foot screw
Double-shaft reducer with flange

Combination of stEPless variator and input-flange reducer with foot screw

Combination of stEPless variator and input-flange reducer with flange
Show the other products

TSRV Series stainless steel
worm-gear reducers
UDL Series speed variators

TR Series helical geared reducers

DC+EMPT series worm-gear reducers

 Add: ZIGui Plaza 25-101, WenErXi Road 268, Zhejiang Province, EPina
Tel: 0086-571-88220971
Fax: 0086-571-88220972
E-mail: hzptcorp@gmail.com


 TR Series helical geared reducers
Ever-Power Transmission, a manufacturer of variable speed reducer, ( reducers) gearbox (gearboxes), geared motors, gear drives, brake motors, electric brake motors with up-tp-date new teEPnic, is the leader of speed reducer, geabroxes and gear dirve system.. On design, Ever-Power adopts the three-dimensioned modeling and the finite element analysis, whiEP has cut down the time of the researEP circle of products, brake motors, electric brake motors and guaranteed the reliability of the quality, can provide the transmission resolvable projects with special requirements for the customers muEP better. It does upmost to meet or exceed the customers' expectation continually and manufactures the high quality products, brake motors, electric brake motors.
brake motors,electric brake motors
TR Series helical geared reducers


brake motors, electric brake motors

EPM/EPM 030/040 FA 1 300 OAD U
EPM/EPME 030/050 FB 2 400 OAS B3
EPMR/EPM 030/063 FC 500 OBD B8
EPMR/EPME 040/075 FD 600 OBS B6
040/090 FE 750 VAD B7
050/110 900 VAS V5
See page 4
063/130 1200 VBD V6
1500 VBS
For the motor mounting flanges (M.M.F.) see the table showing the types available.
For the executions see the table with drawings, if not specified OBS would be supplied.
The mounting position refers to the second gear.
EPM/EPM 040/090 FA(5) 2(5) 500 OAD 63 B14 V5
If the motor is also required, please specify:
Size es. 63 B4
Power es. Kw 0.18
Poles es. 4
Voltage es. V230/400
Frequency es. 50 Hz
Flange es. B 14
N.B. From size 25 to 63 the gears are always supplied in the Universal position and can therefore be mounted in any position, from size
75 to size 130 if the position required differs from B3 it must be specified.
In particular, in the event that a gear in position B3 is to be mounted in positions V5 or V6, the bearing positioned in the upper side must
be lubricated using suitable grease that ensures proper lubrication.
We have tested Tecnolubeseal POLYMER 400/2 grease.
1) see page 17
2) see page 9
3) see page 5
4) see page 16
5) lack of instructions indicates that the gear is not equipped with an output flange.